Table of Contents
What is Fox Talas?
TALAS stands for Travel Adjustable Linear Air Spring, and while the name remains, the spring curve is not linear. Fox engineers developed an entirely new adjustable-travel air spring that closely resembles those used in Float forks.
How do you measure a fork?
Fork Length (Axle-to-Crown) The more common method of specifying fork length on modern bikes, measured in a direct line from the fork crown to the axle. Length-on-Axis is the less common method of specifying fork length on modern bikes, measured from the fork crown to the axle along the steering/head tube axis.
How do I know which FOX fork I have?
Registered. If you call the Fox Service number and give them the serial number, they can tell you what year and model the fork is.
How do you adjust a travel on Fox Talas?
36mm TALAS 5 forks come stock with a 40mm travel adjustment range*….Modifying Travel Adjustment Range
- Set the fork to the long travel mode.
- Use a 6-point Chamfer-less socket to unthread the topcap from the fork crown.
- Use one Travel Adjust Spacer for every 5mm you would like to reduce your travel adjustment range.
How do you adjust Fox float on CTD?
Adjusting Rebound
- Make sure your CTD adjuster is set in Descend mode (fully counter-clockwise).
- Starting with the rebound adjuster in the fully open position (counter-clockwise) push down on the saddle to compress the shock and feel its return speed.
What is the difference between FOX 32 and 34?
Roughly summed up, the 32 series of forks are made for cross-country and light trail use, the 34 forks are meant for all-around trail use, the 36 is for heavy-duty trail/all-mountain use, the 38 is for enduro riding and racing while the dual crown 40 is made for downhill and extreme gravity riding.
How do you put air in Fox Talas?
Using the Air Spring Settings table below, pump your fork to the appropriate setting using the FOX High Pressure Pump, then remove the pump….Setting Sag.
| AIR SPRING SETTING guidelines | |
|---|---|
| Rider Weight | Air Pressure |
| 125 – 135 lbs. | 55 psi |
| 135 – 145 lbs. | 60 psi |
| 145 – 155 lbs. | 65 psi |
How do you tell what year your FOX fork is?
How much pressure should I put in my rear shock?
The exact PSI you end up with depends on how plush/firm you want the rear shock to be, but a good starting point is 1 psi for 1 lbs in weight of the rider (including riding gear). Then just add/remove air to your liking.
How much is a FOX 32?
$1,039.00. In Stock. FOX 32 Step-Cast Performance Suspension Fork – 29″, 100 mm, 15QR x 100 mm, 44 mm Offset, Matte Black, GRIP, 3-Position.