Table of Contents
What does meguiars 105 do?
The real benefit of Meguiars Mirror Glaze 105 Ultra-Cut Compound is how fast it works! The super-micro abrasives cut quickly to remove 1200 grit sanding scratches, acid rain, and severe swirls and holograms. Rather than going over and over the same spot, you can remove the blemish and move on to the next step.
What grit is meguiars 105?
1200 grit
Meguiar’s M105 Mirror Glaze Ultra Cut Compound is formulated with exclusive, super-micro abrasive technology for removing below surface defects like scratches, acid rain, severe swirls and holograms, and up to 1200 grit sanding marks.
What do I do after Meguiars Ultimate Compound?
Just follow up with any light polish such as Ultimate Polish or M205. If using ultimate polish remember to wipe or wash away all the oils left behind to see the true condition of the paint.
Should I wax after compound?
TIP: You should always follow a polishing compound treatment with car polish or car wax to refine the shine and to protect the paint.
What pads to use with Meguiar’s M205?
Recommended pads to use with Meguiar’s 205 Ultra Finishing Polish: Buff and Shine Uro-Tec Yellow Polishing Pad – The ideal choice for a well-rounded polishing pad. It has enough cut to remove defects and compounding swirls while finishing down on most paint types.
Do I need to polish after using meguiars compound?
Do I need to polish after using Meguiar’s Ultimate Compound? You don’t need to do any further polishing, however applying a glaze to the paint will temporarily mask some imperfections and further improve the visual appearance of the car.
Do you need to wax after compound?
The experts at Turtle Wax advice that applying a wax coating to your car after using such a compound can restore shine and also seal and protect your car against future damage. Park your vehicle in a shady area where it is shielded from direct sunlight.
Should I compound or just polish?
Rubbing compounds basically targets the uneven car’s surfaces caused by scratches while on the other hand; polishing is preferably used for adding smoothness and shine to the car paint. Both will help in improving your car’s quality but in a different way.
Can I skip polish After compound?
The simplest answer is just to check your work after the compounding stage with proper lighting. If there is any micro-marring or hazing from the compounding stage, then use a finishing polish before your wax/sealant.