Table of Contents

## How much does a 265 70 R17 tire cost?

Size 265 70 R17 starting at: $34.99. Tires in stock: 979. Available brands: 117 with 346 models.

## How big are P265 70R17 tires?

265/70R17 Conversion When converted to inches, 265/70R17 is equivalent to 31.7×10. 4R17. 265/70R17 tire has a section width of 10.4 inches which is the measurement of tire’s width from its inner sidewall to its outer sidewall. Rim diameter of 17 inches represents the size of the wheel the tire can be mounted on.

**What does P265 mean on a tire?**

Let’s take for example P265/60R18. This code gives you the following information about your vehicle’s tire: P = Passenger Tire (Light Truck Tires will begin with the prefix LT). 265 = Section Width in millimeters (measured at the widest part of the tire from sidewall to sidewall)

### What is the difference between 265 70R17 and 265 65R17?

The 265/70R17 is a General Grabber ATX and the 265/65R17 is the stock Hankook. And just for fun, it doesn’t look very big compared to a 26×4. 8” bike tire, it’s just barely taller!

### What size rim do I need for 265 70R17?

Tire Size Calculator – Tire & Wheel Plus Sizing BETA

Unit: Imperial Imperial Metric | |
---|---|

Rim Diameter | 17.00 in |

Rim Width Range | 7.00 in – 9.00 in |

Overall Diameter | 31.61 in |

Sidewall Height | 7.30 in |

**Will 265 70R17 fit 265 75R16?**

Registered. You sure can. Those two sizes (265/70R17 and 265/75R16) have the exact same hight/width.

## What is the difference between 265 and 245 tires?

The 245 and 265 represent the width of the tire in millimeters. The main difference between 245 and 265 tires is the width. The 265 tire is wider at 10.43 inches, while the 245 tire converts to 9.65 inches.

## What does p265 65R17 mean?

This number means that your tire has an aspect ratio of 65%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 65% of the width. In this case, the sidewall height is 0 millimeters.

**What do the 3 numbers on tires mean?**

B: TIRE WIDTH The three-digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. This may also be referred to as the section width. C: ASPECT RATIO The forward slash separates the tire width number from the two-digit aspect ratio.

### What does 70 mean on a tire?

If a tire has an aspect ratio of 70, it means the tire’s height is 70% of its width. Lower aspect ratio tires, such as a 60 series, generally offer vehicle handling performance advantages over higher aspect ratio tires, such as a 75 series, but a typical trade off can be ride harshness.

### What is bigger a 245 or 265 tire?

The 265 tire is wider at 10.43 inches, while the 245 tire converts to 9.65 inches.

**How much taller is a 265 tire than a 245?**

## Can I put 245 tires on 265 rims?

The 245 35 R17 tire has a width of 245 mm, a height that is 35% of 245 mm (85.75 mm), and it is compatible with a 17-inch diameter rim. The 265 40 R17 tire has a width of 265 mm, a height that is 40% of 265 mm (106 mm), and it is compatible with a 17-inch diameter rim.

## What size rim do I need for 265 65R17?

Tire Size Calculator – Tire & Wheel Plus Sizing BETA

Unit: Imperial Imperial Metric | |
---|---|

Rim Diameter | 17.00 in |

Rim Width Range | 7.50 in – 9.00 in |

Overall Diameter | 30.56 in |

Sidewall Height | 6.78 in |

**What does T stand for in tires?**

A “P” stands for p-metric, which is a tire used primarily on passenger cars. An “LT” indicates a light-truck tire. A “T” means it’s a temporary spare. Some tires get a “Z” or an “F” attached to the radial indicator, denoting a Z-rated tire (see service description below) or a run-flat tire.