How do I setup my D-Link DI 524 wireless router?
How to setup WPA-PSK (wireless security) for DI-524?
- Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using a network cable.
- Step 2 Launch IE (Internet explorer).
- Step 3 Key in your user name and password (User name is Admin with no password by default).
What is the IP address of D-Link?
192.168.0.1
Your D-Link router, by default, has a static IP address of 192.168. 0.1.
How do I find the IP address of my D-Link modem?
Press the Windows key and R together. Type cmd in the box and click OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and default gateway of your adapter.
How do I reset my DIR 524?
Press the reset button for 10 seconds. You can use a small object, such as a paper clip to hold down the button. Do not power off the unit while the router is being reset. The unit should now reboot, and once the WLAN light stops blinking the router should be reset.
How do I configure my Dlink router as a switch?
Connect your D-Link switch to your network router with a network cable and turn it on. Plug another network cable into a network-out port on the switch and plug the other end of it into your computer.
What is default IP for D-Link switch?
10.90.90.90
The default IP address for D-Link managed switches is 10.90. 90.90 with a subnet of 255.0. 0.0. 1435 people found this useful.
How do I access my D-Link switch?
Type the switch’s IP address into the address bar of your browser. Log into the switch (the default password is admin). Click OK. The network switch’s default IP address is 10.90.
How do I connect to Wi-Fi using IP address?
Log in using a web browser Now that you have the router’s IP address, open any web browser and type (or paste) the IP address into the address bar. Your router’s login panel will then load within the browser window.
How do I find my Xfinity IP address?
Directly connect your computer to the Comcast modem, click “Start,” click “Run,” type “CMD” into the Run window and wait for the command prompt to appear. Type “IPCONFIG” in the Run window and look at the IP address that is returned, as it will be the current IP of your Comcast modem.