How do I access the Buffalo NAS drive?
Mapping a Drive to a Buffalo NAS in Windows
- Open NAS Navigator.
- Right-click on the NAS.
- Select “Browse Shares” from the pop-up menu.
- Right-click on the shared folder you want to map to a drive letter.
- Select “Map network drive…” from the pop-up menu.
- Click on the drop-down menu to change the drive letter if desired.
How do I access my Buffalo NAS FTP?
Open the LinkStation GUI and click on the settings icon in the quick launch panel. In settings click on the “FTP” icon under “Services”. Click the checkbox to enable the FTP service.
What is BuffaloNAS com key?
BuffaloNAS.com Key This is the password (“key”) that protects your LinkStation’s or TeraStation’s BuffaloNAS.com name. Try to select a password that is not easily guessed by others.
How do I access shared folder in LinkStation?
in your computer and enter “\\LinkStation’s name\Shared folder names$\” for the name. For example, if the LinkStation name is “LSXXX001” and shared folder name is “share”, enter “\\LSXXX001\share$\” to open it.
How do I register my BuffaloNAS com name?
If you close the welcome screen, you can register directly from the NAS List with the procedure below. Tap . Tap [Name], enter a name for this connection, and then tap . Tap [Registration Type], then select [BuffaloNAS.com Name].
What port does Buffalo NAS use?
The Buffalo NAS Drive runs this Web access feature on TCP Port 9000. Since your NAS drive is on private ip address, you cannot access it over the Internet. For it to be accessible over the Internet, you must access it over your public ip address.
How do I share a folder on a Buffalo NAS?
Creating a new Shared Folder on a Buffalo TeraStation
- Log in to the management GUI for the TeraStation.
- Navigate to the “File Sharing” tab and click the Folder Setup widget button.
- Click Create Folder.
- Enter a folder name and a user ID.
How do you use Buffalo WebAccess?
To test access, go to BuffaloNAS.com and enter the name you assigned. You should be taken to the WebAccess interface for your LinkStation. If this does not work, it is likely either port forwarding settings in the router are incorrect, or you are attempting to use an external port that is blocked by the ISP.
How do I change the IP address on a Buffalo NAS?
NAS Navigator2 will start….Alternatively, changing the IP address from Settings:
- For a PC, double-click the icon.
- For a PC, right-click on the icon, then select [Settings].
- Enter the username and password, then click [Login].
- Navigate to [Network] – [Settings] – [IP Address Settings], then click [Modify Settings].
What is the default IP address for a Buffalo router?
Enter the IP 192.168. 11.1 into your browser and pressing enter.