What does RTCA DO-160 stand for?
Environmental Conditions and Test Procedures for Airborne Equipment
DO-160, Environmental Conditions and Test Procedures for Airborne Equipment, published by RTCA (Radio Technical Commission for Aeronautics), is the international standard that defines environmental test conditions and applicable test procedures and criteria for avionic equipment to determine their performance …
DO-160 summary?
The tests in RTCA/DO-160 provide a laboratory means of demonstrating the performance characteristics of airborne equipment in environmental conditions that may be encountered in operation of the equipment in aircraft.
DO-254 guidelines?
Simply stated, DO-254 is a requirements-driven process-oriented safety standard used on commercial electronics that go into aircraft. (Conceptually speaking, this standard applies to all electronics in anything that flies or could crash and pose a hazard to the public.)
DO-254 verification and validation?
RTCA/DO-254 defines validation as “The process of determining that the requirements are the correct requirements and that they are complete” and defines verification as “The evaluation of an implementation of requirements to determine that they have been met.” In simple terms, validation ensures the item is correctly …
Does 160 salt spray?
The RTCA DO-160 salt fog test standard determines the effects of ocean conditions. These conditions are a salt atmosphere that can be extremely corrosive. Products placed in service on a plane operated near or over a salt water body of water are susceptible.
Does 160 have magnetic effect?
The RTCA DO-160 magnetic effects test standard determines the magnetic effect of aircraft equipment. RTCA/DO-160G testing is mainly intended for finding or proving the closest distance to compasses or compass sensors (flux gates) at which that unit is allowed to be installed.
Does 160 decompression test?
The DO-160 specification was designed to test sudden pressure changes starting from 8,000 feet to 60,000 feet (536 to 55 Torr) in 15 seconds. An altitude of 8,000 feet (536 Torr) was used for the initial cabin altitude and 60,000 feet was used for the final cabin altitude after decompression.
Is 160G Category 5 A?
RTCA DO-160 classifies equipment in one of five categories. RTCA DO-160G Section 5.0 Temperature Variation Testing Category A: This category is for equipment external to the aircraft or internal to the aircraft. The temperature variation testing is a minimum of 10 degrees Celsius per minute.
DO-178C vs DO-254?
While DO-178 is the standard that defines the software planning, development, verification, quality assurance and configuration management process, DO-254 focuses on avionics hardware components and how designers must comply with certain safety specifications.
DO-178C DO-254 & ARP4754A?
Three key standards which regulate the development of aviation systems compliance are DO-178C, DO-254, and ARP4754A. DO-178C and DO-254 are standards that provide guidance for the safe development of software and hardware, while ARP4754 focuses on the system aspect.
What is dal a certification?
Design Assurance Level A (DAL-A) is the highest level of design assurance that can be applied to airborne software and is applied when failure or malfunction of the software could contribute to a catastrophic failure of the aircraft.
Is do 160 latest version?
G December 2010
DO-160, Environmental Conditions and Test Procedures for Airborne Equipment is a standard for the environmental testing of avionics hardware….DO-160.
| Cover of original 1975 issue | |
|---|---|
| Abbreviation | RTCA DO-160 EUROCAE ED-14 |
| Year started | 1975 |
| Latest version | G December 2010 |
| Organization | RTCA EUROCAE |
Does 160g vibrate?
The purpose of DO-160 vibration testing, which involves a series of tests, is to demonstrate that airborne equipment complies with performance standards and durability requirements when subjected to installation-specific vibration levels.
Does 160 salt fog test?
Do 160g Do section 15?
The RTCA/DO-160 Section 15 measures the magnetic effect of the equipment and its main goal is to determine the closest distance to compasses or compass sensors (flux gates) at which that unit is allowed to be installed.
Does 160 rapid decompression?
Does 160G Category 5 Do section B?
RTCA DO-160G Section 5.0 Temperature Variation Testing Category B: This category is for equipment in a non-temperature-controlled or partially temperature controlled internal section of the aircraft. The temperature variation testing is a minimum of 5 degrees Celsius per minute.
DO-178C explained?
The DO-178C is the definitive standard for commercial avionics software development which is used both in the aerospace and defense industries. Approved since 2013, it describes guidelines for producing airborne systems and equipment software.
What are the Dal levels?
DALs, Design Assurance Levels, are the key measures assigned to software and hardware functions used to determine the level of stringency applied to different components of an avionics system.