How do you reset the code on a Zanussi washing machine?
Resetting guide: Press the two buttons at the top (soak and pre-wash). At the same time, turn the cycle selector counter-clockwise to the delicate spin cycle. Then release the two buttons and continue turning the selector counter-clockwise all the way round to off (almost one full turn). Try to wash normally.
What is E40 on Zanussi washing machine?
An E40 error on a Zanussi washing machine points to a malfunctioning door. First, check if the door is properly closed. Make sure there is no laundry trapped between then washing machine and the door. If the washing machine is completely full, the problem might be that the drum is overloaded.
What does Error 20 mean on a Zanussi washing machine?
Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes. It indicates pumping problems. Washer dryer does not drain. The drum does not turn. The appliance makes an unusual noise because of the blockage of the drain pump.
How do I find my Zanussi error code?
Error codes on Zanussi washing machines will be displayed in two different ways. If your machine has an LCD display you’ll see the letter E (E is for Error) followed by two numbers. If your machine has no LCD display however, combinations of LEDs on your machine will flash.
How do you reset a Zanussi dishwasher?
On a display like this to reset the appliance, press and hold the On/Off button on the appliance for 3 seconds. This will reset the appliance and clear any previously set programmes. On a display like this to reset the appliance, press and hold the Programme button on the appliance for 3 seconds.
How do you unlock Zanussi?
Reset the machine. Switch off the mains plug socket and then switch it on again after about 20-30 seconds. Then test whether the machine is working normally, this should also reset the door lock icon. If this hasn’t worked then we recommend an engineer visit.
What does E41 mean on a washing machine?
To do so, the machine will display an error code that corresponds to the issue it’s facing. The E41 error code on your Frigidaire washer means the appliance is experiencing a door lock error. The most likely causes are a faulty door latch assembly or a failed main control board.
What does E10 mean on washing machine?
Issue. Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash. It indicates a problem with not taking in water, not taken in enough water or problems with the drain.
How do I open my Zanussi washing machine mid cycle?
The door can be opened normally at the beginning of a wash cycle by pressing the start / pause button. Warning: If the door can be opened during a wash or spin cycle, when the washing machine is filled with water, turn off the power immediately.