Can you use any thermostat with DITRA-HEAT?
Yes, the Wi-Fi thermostat can be used with any electric radiant floor heating system that does not exceed a 15 amp load.
How do you reset a Schluter thermostat?
In the “Installer settings”, select “Factory reset”, go through the set up, and when at “Load measurement” select “ON” to activate the automatic power measurement, if you do not have any expansion unit(s)/power module(s) connected to the thermostat.
How do I connect my Schluter thermostat to WiFi?
To setup the WiFi functionality, select the Menu on the thermostat and then select the WiFi/Weather setting. Follow the prompts on the thermostat to setup the WiFi connection and then start the process for the activiation email to be sent to your email address.
What temperature should Ditra heat be set at?
The thermostat must be set at 82°F (28°C) or lower at all times. This can be done manually or by selecting “Laminate Flooring” in the “Floor Protection” section of the “Installer Settings” menu of any of the Schluter®-DITRA-HEAT-E thermostats.
Can I use a 15 amp breaker for DITRA-HEAT?
Multiple DITRA-HEAT-E-HK heating cables over 15 amps cannot be connected to a single DITRA-HEAT-E thermostat.
Do heated floors need their own circuit?
If you’re installing radiant floor heat in an existing room, you’ll need a dedicated 15- to 20-amp GFCI-protected circuit to power the system, and an excuse to lay a new tile floor. If you’re remodeling, it’s a good time to satisfy both requirements.
How do I find my underfloor heating fault?
UNDERFLOOR HEATING FAULT FINDING We can detect a faulty heater by using a thermal imaging camera and specialist testing equipment which is used to locate the exact point of fault. The damaged cable or pipe is then accessed by lifting the floor for that area only and fixing the damaged heater.
What is the most efficient way to run underfloor heating?
For an efficient system and quick response times, set your underfloor heating temperature to 16°C in “off” periods. This will result in a quicker warm up time as the heating system needs to supply less energy.
Does DITRA-HEAT warm up the room?
The thermostat only allows the heat to warm up to 84 degrees. You might feel this on your feet but it seems unlike to warm or dry the air above, even as a secondary heat source. Other systems allow 104 degrees.
Does underfloor heating need its own circuit?
All Warmup electric underfloor heating systems require a 230 VAC supply and it is recommend that your floor heating system be placed on a dedicated circuit to power your heating system.
What is the best temperature for underfloor heating?
Underfloor Heating is often left on for long periods to provide background warmth, you may choose a temperature setting of 16-27 degrees Celsius (60-80 degrees Fahrenheit) for home heating, depending on the room. This could rise to a max of 32 degrees Celsius (90 degrees Fahrenheit) for fast warming.
What temperature should DITRA-HEAT be set at?
Do heated floors need a GFCI?
GFCI protection is NOT required for floor heating cables in a bathroom. GFCI protection is NOT required for floor heating cables in a kitchen.