Can I use 18mm chipboard for flooring?
Chipboard flooring is available in 18mm and 22mm thicknesses, and the tongue & groove sheets are 2400m x 600mm (approx. 8′ x 2′) in size. The sheets use high-density particleboard and are suitable for both domestic and commercial flooring.
What can I use instead of chipboard flooring?
Flooring specialists in London say that there are a lot of advantages of applying plywood over chipboard as a floor decking material – it is much stronger and yet it can be used in a smaller thickness, generally 12mm is the better alternative for a sturdy floor deck than the 22mm chipboard.
What is the difference between P4 and P5 chipboard?
P4 – It is load-bearing only for dry conditions. P5 – It is moisture resistant and load-bearing. It is preferred for chipboard floorboards.
What is the best chipboard flooring?
For most projects, the recommended grade of chipboard would be P5, which is suitable for a wide range of applications. Alternatively, if working on a project with heavy loads where non-domestic floors are being created, the P7 heavy-duty grade moisture resistant chipboard would be most suitable.
Is 18mm thick enough for flooring?
18mm is a repalcement for the floor boards, this will still require strengthening. Either fit a layer of 12mm over the top of this, a layer of aquapanel, or fit 25mm straight to the joists with noggins as required.
Should I use 18mm or 22mm flooring?
Choice of thickness for the boards will depend on the spacing of your floor joists. If they are spaced at 450mm or less, you can use 18mm boards. If the spacing is greater than 450mm, use 22mm thick boards. Provided you don’t anticipate having to lift the flooring again, glue the joints to make them even stronger.
Is plywood better than chipboard for flooring?
Each has its purpose, but when it comes to a material that’s good for a sub floor, there’s no getting away from the fact that a number of the characteristics of chipboard make it a less suitable material than plywood for laying under your wood floor.
Can I use 18mm OSB for flooring?
OSB tongue and groove 18mm boards are suitable and widely used in structural (manufactured in accordance with EN 13986) and interior applications, such as: Load bearing roofing & flooring applications.
What does P5 mean for flooring?
moisture resistant flooring
Most manufacturers now promote the moisture resistant flooring (P5) version, as the price difference between standard grade flooring (P4) and moisture resistant flooring (P5) are negligible, but the advantages of a P5 board (moisture resistant chipboard) out way the slight cost increase.
What is p6 chipboard?
Mezzanine has been specifically developed for industrial applications and is mainly used to create extra floors in warehouses. This makes Mezzanine boards a financially attractive alternative for people who need extra space for their business.
Does chipboard flooring have to join on a joist?
Chipboard should be laid lengthways across your joists, with the long edge of the board against the wall. You should align the board to allow for a 10mm expansion gap between the edge of the board and the wall. Don’t worry, this gap can later be covered by skirting.
Is 18mm plywood suitable for flooring?
structural 18 mm ply is fine ,you may have to add some timber noggins to offer further support at edges where butting up to chipboard on joists and adjoining edges .
Is OSB or chipboard better for flooring?
OSB is too rough to use as flooring, and ply is overkill UNLESS you are laying tiles on it. If it is being tiled, go for 18mm P5 Chipboard then overlay with 6mm ply fully bonded and screwed to the deck below….
What is the difference between chipboard and OSB?
Chipboard manufactured from waste materials has extra carbon offset value making a contribution to a sustainable environment. Oriented strand board (OSB) is an engineered, composite, wood-based panel product, designed as a structural replacement for sheathing grades of plywood.
What is P6 flooring?
Why is it called a mezzanine floor?
Mezzanine definition A mezzanine is an intermediate level or levels between the floor and ceiling of any story in accordance with Section 505 of the International Building Code. Mezzanine meaning derives from the Italian word mezza which means “half” or “middle.”
What size screws 18mm floorboards?
What size screws for 18mm floorboards. We would recommend 50mm screws. The reason for this is that you want to avoid hitting electrical cables that may be running under the floorboards.
Is 18mm OSB OK for flooring?
How thick should a mezzanine floor be?
On average, most of the mezzanines we provide have a deck thickness of 1’3” or 1’5”. If the extra couple inches are critical then by all means go for it, but if not, it is usually not worth the added cost.