Can a NanoStation be used as an access point?
You’ll then need to log in with the default username and password of “ubnt”. The first step is to configure the wireless tab so the NanoStation acts as a WiFi Access Point. Change the settings according to the below picture. Be sure to set the device up with WPA2 security and an appropriate WiFi password here.
What is the range of outdoor access point?
Ubiquiti UAP-AC-M-Pro The official range of the access point is the same as the normal Unifi Mesh, 183 m (600 ft), but you should be able to get higher speeds with this model.
HOW FAR CAN 2.4 GHz travel?
Without taking any external factors or major obstacles into consideration, a lot of standard WiFi routers operating on the 2.4GHz frequency can reach up to 150 feet (46m) indoors and 300 feet (92m) outdoors. In comparison, those using the 5GHz frequency usually reach around one-third of these distances.
Can WiFi go through walls?
In theory, Wi-Fi signals are capable of passing through walls and other obstacles relatively easily. However, in reality, some walls are thicker or use reinforced concrete and may block some of the signals. Materials such as drywall, plywood, other kinds of wood and glass can be easily penetrated by wireless signals.
Can my neighbor use my WiFi?
If you want the direct and simple answer, it’s illegal to use your neighbor’s Internet service without their consent, period. Your neighbor is paying for the service and if you are using it without their knowledge, it’s stealing.
How do I activate DD-WRT on my Ubiquiti nanostation2?
DD-WRT now requires a 20 Euro activiation fee for many wireless devices including the NanoStation2. Installing the Firmware. Step 1: Download the Ubiquiti DD-WRT firmware located at: Step 2: Power down the NanoStation by unplugging the Ethernet cable from the POE box.
How do I set up Nanostation?
On the original Nanostation shipping box, find and write down the default IP address (we assume: 192.168.1.20), the user name and password (should both be “ubnt”). Do not loose this information! 1) Set your computer to communicate with Nanostation 1a) Windows 1b) Mac OS X 2) Program Nanostation as receiver (station) and router 3)
What is the default IP address of The Nanostation 5?
Default IP Address 192.168.1.20 NanoStation 5 Accessing airOS Accessing airOS Connect to the airOS Configuration Interface. 1. Make sure that your host machine is connected to the LAN that is connected to the Ubiquiti device. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet.
Can fixed users use The Nanostation 2?
Fixed users can also use it, although there might be other more suitable configurations for them. Make sure the Nanostation 2 (Nano for short) is connected to your computer’s network card with network cables, via the power injector (supplied with 12V either from the included wall-wart or another 12VDC source).